1.Product Introduction of the Kaeser air oil separator 6.3669.0
The air compressed from the head of the compressor mains is filled with oil droplets of different sizes. Large oil droplets are easily separated by the oil and gas separation tank, while small oil droplets (suspended) must pass through the micron-sized glass fiber filter of the oil separation filter. The material is filtered. The correct choice of glass fiber diameter and thickness is an important factor to ensure the filtration effect. After the oil mist is intercepted, diffused and polymerized by the filter material, the small oil droplets are quickly polymerized into large oil droplets, which pass through the filter layer under the action of aerodynamic force and gravity, and settle at the bottom of the filter element. These oils are returned to the lubrication system through the inlet of the return pipe at the bottom of the filter element, so that the compressor discharges relatively pure, high-quality compressed air.
2.The picture of the Kaeser air oil separator 6.3669.0
3.OEM Replacement Filters
AYATER designs, manufactures and markets a complete line of Filter and Strainer Replacement Elements which are functionally and dimensionally interchangeable with industrial OEM filter manufacturer elements.
See our Filter Element Cross Reference Interchange to find the AYATER equivalent to an OEM filter element.
4.Part number of the Kaeser air oil separator 6.3669.0
5.Deliver and Shipping products
6.Cooperative customers pictures